How to Sight in Scope without Shooting (Complete Guide In 2022)

Sighting in a riflescope is the most important thing you need to do after buying it. All the professional shooters and hunters always use the scope to increase the hitting rate. They also think that sighting in scope with firing is not always necessary. Rather it’s better to sight without shooting is better as pre-adjustment of the scope is necessary. At the same time, there is no logic of wasting the costly ammunition in every adjustment.

Usually, you will need to make a shoot for sighting in the riflescope. But if you are stubborn like me, who will not like to lose ammunition, then there are alternative methods for you. Today in this article, we will discuss some of the easiest ways to sight in a riflescope without shooting.

How to Sighting in Scope Without Shooting In Different Ways

There are multiple ways to sight a riflescope without making a shoot. Below, we will describe some of them:

How to Sight in Scope without Shooting

1. Laser Bore-Sighting

Well, it can be the most convenient way to sight your riflescope within the shortest time. For this particular method, you will require a device known as boresighter. The tool can be mounted on the arbors and fit in the rifle’s muzzle. It is equipped with new technology to keep it in line. The most impressive thing about the laser boresighting is it is one of the most accurate and professional ways to sight your riflescope without shooting.

Using the boresighter is very easy. Attach the boresighter according to the manual on your rifle. Now equip the riflescope and go through it to your target. Find out the last point of the laser light and move the crosshair in that exact position. You are done!

2. Visual Bore-Sighting

This is one of the ancient ways to bore sight a riflescope. It is also one of the easiest one. In this method, you will need to align the center of the rifle’s barrel with its sight. You will require only a few minutes to do it. Here is how you will do it – at first, stable the rifle on a steady platform. If possible use gun rests or simply use some books or sandbags for doing so.

Now remove the bolt and try to look on your target with one eye through the bore. Do it without moving any of the rifles fine-tune knobs. Now look through the scope and move the crosshair to the position that you have seen with boresight. Now you are done and your scope has been sighted!

A thing about visual bore-sighting is you will need to repeat the whole process for multiple times to find out a much accurate sighting.

3. Optical Boresighting

The process is as like as the laser bore sighting. It requires a device which you will need to attach on the rifle. Make sure the lens is lining up with the scope. Now look through the grid of the lens and adjust the crosshair of the scope to match the center grid. You are done!

4. Magnetic Boresighting

Magnetic boresighting is not that popular. But it can be highly effective for sighting the riflescope. It is one of the most flexible ways to sight your riflescope. It is also as like as laser boresighting. But for magnetic boresighting, you will need to attach the device in the muzzle of your gun using a strong magnet. Using this way, you can quickly boresight your riflescope without any fear of inserting something in your gun’s barrel.

The Following Things Are Important Prior To Start the Processes

There are some processes mentioned here, and you and you can follow any specific one that seems easy. But you should do these things before following the primary processes. Without doing these, you might not sight in a scope. I think you understand how important the followings are.

Mounting the Scope:

In the very first, you have to mount the scope on the rifle. Not ordinarily, the perfect mounting of the scope with the rifle lets you sighting in a scope easily and comfortably. For that, you should set the base and rings on the rifle very perfectly. And then set the rifle scope into the rings.

Bulls-eye Target:

After mounting the scope with the rifle perfectly, you will need to fix a target. For that bulls-eye target is highly preferred. As you practice sighting without shooting so, you will not have any bullet hole. But you need a dot on the paper for the target. You can also pain or draw yourself.

Set the Distance:

The distance range is a matter. You should coordinate between the range of the scope and the range you are going to practice. I always advise practicing at least 2 different distances so that you can position your hand at different locations.

Resting the Rifle:

I don’t know how much importance you are giving to these points. But I just can say you will realize later if you skip any of this and then you will understand the significance of these.

Anyway, the last step is to stabilize the rifle. This process is called rifle rest. You should stable the rifle with a fixed object. You have to stable it in such a way as if it will not move at all.

Frequently Asked Question (FAQ)

✅ How do I set up my rifle scope for sighting?

Most rifles are equipped with the scope mounting system. The rifles bear tapped holes and pre-drilled holes for the base of the scope. Just mount the base, and then scope rings. But be careful while choosing the rings because all rings are not compatible with all scopes. So, select the right sized ring and then mount the scope with the help of scope rings.

✅ What do I need to sight in my scope?

Just follow any method described here; hopefully, you can sight in your scope very easily. But don’t mistake doing the things that are described under the heading ‘’ Following Things Are Important.’’

✅ How to sight in a scope without shooting?

This guide provides detail information regarding this matter. Just mount the scope, stabilize it, set the bulls-eye, and then follow your preferred method. Simple.

✅ How to sight in a rifle scope without shooting?

There are many advantages of sighting in a scope without shooting. I think you know them. Just follow this guide to sight in a scope without firing.

Boresighting is an easy but important function to do after you get a riflescope. Hopefully, from the above-mentioned methods, you will find a perfect method to boresight your rifle comfortably without destroying any of your ammunition.

Louis Harry

I love to hunt and shoot and in this course, I can feel the irritation of time-consuming shopping for the scope, especially in online so a good product review can help you to get over this and to provide you the basic knowledge so that you can get along with the dealing. But all the content available in online are not equally effective and helpful. Even most of them are really boring and lack of information or full of wrong information. Read More

More Posts - Website

Follow Me:
TwitterFacebookGoogle Plus

Leave a Comment